Wall protection

10-foot (3048 mm) PVC panel mouldings from (FRP) are ideal for finishing your siding. Mouldings are used for the following functions: panel joints,...

Acrovyn from Construction Specialties is the ideal wall protection product for your facility. Acrovyn has been protecting the walls of thousands of...

Mouldings made of Acrovyn designed for use with 0.04'' and 0.06'' thick sheets. Available in 10' lengths and 60 colors (same as Acrovyn sheets). Se...

FRP panels are made of reinforced fiberglass. They are mildew- and impact-resistant, protected by an easy-to-clean, stain-resistant protective fini...

Rubstrips are an economical option for areas subject to light but frequent contact. They offer protection against damage caused by chairs, desks, e...

Titebond FRP adhesive is designed specifically for this type of panel. It's a solvent-free adhesive that's ideal for bonding to porous surfaces su...

Protective corners in stainless steel 304-4, 16 Gauge. Several widths and lengths available. Contact us if you require dimensions other than those ...

These corner protectors are made of Acrovyn and do not use a wall retainer; they are fastened with a pre-installed self-adhesive strip. Model CS-V...

311-ml tubes cover approximately 90 to 100 linear feet (1/16" joint). The colors offered are perfectly matched with the 60 colors of Acrovyn sheets...

This Acrovyn corner protector features a shock-absorbing function. This model has a 1/4" radius and a 3" width. The SM-20N model features an Acrovy...

Transparent Lexan (polycarbonate) bumper strips are 0.06" thick. They are an option for areas subject to light and frequent contact. They offer pro...

List of end caps and corners (inside and outside) for Construction Specialties brand handrails. Note: For inside corners, two end caps are supplied...

List of end caps and corners (inside and outside) for Construction Specialties brand handrails. Note: For inside corners, two end caps are supplied...

300 ml white universal silicone for FRP sheets is ideal for sealing mouldings between panels and between panels and surfaces that do not have VRP (...

Nylon rivets are used to secure FRP panels to ceilings (e.g. car washes). They should be used in conjunction with Titebond FRP adhesive for maximum...

This 5 1/2" (139.7mm) high bumper is made of 16-gauge stainless steel. Both the smooth-face (16SSP) and V-groove (16SSV) models mount to the wall u...

This industrial bumper offers increased protection in areas subject to extreme contact. HB-75D is 2-15/16" high and 2-11/16" thick.HB-100D is 3-15/...

This 2 3/8" (60.0mm) high industrial bumper offers solid protection in areas subject to extreme contact. It comes with a black EPDM rubber cover wi...

These industrial bumpers offer solid protection in areas subject to extreme contact. Two models are available - HB-200W30 height 7-11/16'' and thic...

This elegant stainless steel bumper offers exceptional impact protection. It has to be cut to size with 2" (50.8 mm) radius ends and is 1/4" thick....

This elegant aluminum bumper offers exceptional impact protection. It has to be cut to size with 2" (50.8 mm) radius ends and is 1/4" thick. This b...

This sturdy stainless steel footrest is available as a wall-mounted or floor-standing version. The ECR-6S is wall-mounted, while the ECR-6SF is flo...

This 4 1/2" (114.3mm) high wood bumper installs with adhesive. This bumper is available in a variety of wood species and in standard or custom fini...

These wood (and stainless steel) bumper models are 2" wide. The stainless steel strips on these bumpers blend perfectly with the wood. The ends fea...

This 5 1/2" (139.7mm) high wooden bumper is available with a smooth face or with a bumper function. It is available in a wide variety of wood speci...

These wood (and stainless steel) bumper models are 5-1/2" wide. The stainless steel strips on these bumpers blend perfectly with the wood. The ends...

These 3 wooden bumper models have unique features. Here are the specific characteristics of each model: Model FRW-225: 2-1/4" (56.8mm) wide.Model F...

This Acrovyn bumper is ideal for high-stress environments. It is available in surface-mounted (SCR) and bumper-mounted (BCR) versions, with a conti...

This flat bumper is ideal for moderate traffic environments. There are 3 widths of this model and three types of wall mounting for 9 possible combi...

These Acrovyn bed bumpers are designed to offset patient beds from the wall. They allow an offset of 2-3/8" with a single cushion and up to 12" wit...

These Acrovyn bumpers with rounded corners snap onto a continuous aluminum support. Characteristics of the 3 models: FR-125N: Height 1-1/8'' and d...

his rounded bumper has been designed to protect the walls of carts and other rolling equipment (wheelchairs, etc.). Model BG-10N is 4'' high and 2-...

Stainless steel bumper strips have a thickness of 16 Ga and a 304-4 finish. They are an option for areas subject to frequent contact. They offer pr...

This simple stainless steel handrail features a round gripping surface and stainless steel end caps and brackets. Price on request, please contact ...

This simple wooden handrail is attached using simple stainless steel cantilever brackets. You can choose between a round (RW) or oval (OW) gripping...

This Acrovyn single handrail is fixed with simple stainless steel cantilever brackets. You can choose between a round (RA) or oval (OA) gripping su...

This simple aluminum handrail is fixed with simple stainless steel cantilever brackets. Oval gripping surface. Price on request, please contact us....

This handrail is available in 2 models. The HRW-6C is a simple wooden handrail with a round rail and Acrovyn mounting brackets. The HRWS-6C is eleg...

This simple Acrovyn handrail offers a secure grip. It attaches to standard Acrovyn brackets and has a 1-1/2" diameter. You can choose between a rou...

This simple stainless steel handrail features a round gripping surface and stainless steel end caps and brackets. Round brackets are standard, but ...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval wooden handrail and a 4" high...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval wooden handrail and a 4" high...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an ovalstainless steel handrail and a...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval stainless steel handrail and ...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval wooden handrail and a 4" high...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval wooden handrail and a 4" high...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval aluminum handrail and a 4" hi...

Handrail/bumper combination rail. Mounted on two cantilevered stainless steel supports, this railing includes an oval stainless steel handrail and ...